Maytag Washer Stops Mid Cycle: Causes And Ways To Fix It!

The Maytag washer high-tech machine that makes the laundry no more a challenging chore. But sometimes, for no apparent reason, the Maytag washer stops mid-cycle, refusing to complete the final spin. Several reasons can cause the washer to stop partway through the program.

For instance, incoming power problems, the overloaded drum, insufficient water supply, faulty lid switch assembly, defective water inlet valve, faulty door lock assembly, and so on.

Don’t be frustrated! Washing machines are complicated but sometimes such problems can be solved without too much special expertise. So, what to wait for more to know that out comprehensively?

Troubleshooting And Fixes For The Maytag Washer That Stops In Mid-Cycle

Maytag washer is one of the most dependable and trustworthy machines in the market nowadays. But sometimes, like any other machine, it shows malfunctions, as each machine has its own foibles.

All we need to do is figure out the exact reason and fix it. However, let’s see what things you can do about the problem you’re facing with your Maytag washer.

1. Incoming Power Problem And Overload

When your Maytag washer stops mid-cycle, sometimes that silly reason can be that the washer is not getting enough power. Often, that also happens due to the overload of garments in the drum.

Heavy garments cause an unbalanced load. When the machine detects the unbalanced load, it stops in the mid-cycle or refuses to complete the final spin to protect itself.

• So, first of all, you need to ensure that the washer is getting enough power. The power cord should be plugged in tightly. 
• As for the unbalanced load, first, pump out all the water. 
• Take the heavy garments out and evenly redistribute the items in the drum. 
• Now restart the machine.

2. Insufficient Water Supply

Insufficient water is enough of a reason for the Maytag washer to stop mid-cycle. When the washer has problems filling up with water to complete the rinse cycle, it stops partway through a program.

The issue can happen due to a low water supply from your home, a clogged water inlet valve, or the partial closure of the main water inlet valve.

Before moving any further, check whether your machine is getting enough water supply to function properly.

3. Failed Water Inlet Valve

As for the washer not getting enough water supply, a clogged water inlet valve can also be at blame. You know the water inlet valve of the washer opens, allowing the water to enter the tub during the rinse cycle.

But by chance, when the water inlet valve fails, the washer keeps waiting for the water to enter the tub and stops mid-cycle. So, now you need to determine whether the water inlet valve has failed.

• Step 1– To check that out, use a multimeter and test for continuity. If the valve has no continuity, it is damaged. You need to replace it. 
• Step 2– To replace the valve, unplug the Maytag washer and turn off the water supplies. 
• Step 3– Disassemble the machine to access the valve. You can find it under the console panel. 
• Step 4– Now remove the water inlet valve assembly, and replace it with a new one.

4. Faulty Door Lock And Switch Assembly

The Maytag washer only begins operating and functions properly when the washer door is perfectly closed. Here, the door lock secures the washer door during operation.

As for the door lock switch, it prevents the washer from operating when the door is not locked properly.

So, when the door lock or the switch is defective, the washer ultimately stops in the mid-cycle without completing the final spin.

Here is what you can do about the issue.

• First, inspect the door. In case the door lock is damaged and can’t latch properly the washer door, replace it. 
• To check whether the door lock is damaged electrically, check the continuity of it. You can take the help of the owner’s manual to locate the door locks. 
• Moreover, if any of the door lock switches lose their continuity, replace the faulty one.

5. Faulty Lid Switch Assembly

If everything is alright, and still, the washer is not responding, then check the lid switch assembly.

It is the thing that prevents the washer from spinning when the lid opens and makes the washer stop mid-cycle when it fails.

So, now inspect whether the lid switch has failed. Using the multimeter, check the continuity of the lid switches.

If they have no continuity, time to replace them. You can also have professional help if you are unsure about doing it by yourself.

6. Defective Drain Pump

The drain pump is that component of the Maytag washer which assists in removing water from the tub. It does so by forcing the water into the laundry tub or the pipe through the drain hose.

During the wash cycle as the water drains water multiple times from the tub, a defective drain pump makes the washer stop in the mid-cycle.

• First, you need to see the water in the tub. Stop the washer and if you see there is still water in the tub, you need to inspect the drain pump for any type of obstruction. If there is any, remove it. 
• Moreover, use a multimeter to check the continuity of the drain pump. It will help you to determine whether the pump is working or not. If the pump is damaged, replace it with a new one.

7. Malfunctioning Main Control Board

The last possible reason behind the issue can be the malfunctioning main control board. The main control sends the voltage to all the other components of the washer.

So, of course, a malfunctioning control board can make the washer stop in mid-cycle.

Don’t be tense as it happens in rare cases. You should consider the other things that we have mentioned before finalizing a replacement of the main control board.

FAQs

Apart from the detailed discussion about the Maytag washer that stops mid-cycle, here, we have covered the queries that the users mostly asked for. Check it out. 

Final Words

Well, it’s time to wrap up the whole discussion. Now you know how to find the exact problem when your Maytag washer stops mid-cycle and the ways to fix it.

Whenever you face this problem, first, ensure that it is not overloaded. If that’s okay, move ahead to other fixes.

However, if the necessity comes for further help, then just ring a call to the Maytag service center. Undoubtedly they will take prompt action to assist you.