What Causes The Maytag Washer F9 E1 And Their Fixes

Error codes in your Maytag Washer usually indicate something is wrong with the internal components and one such code is F9 E1.

If you see your Maytag washer is showing F9 E1 error code, it usually means the water in the drum is taking too long to drain out. The most common reason causing this problem is blocked hoses and filters which can become clogged up due to residues building over time.

There are a few other reasons that can also trigger this error code, so you will need to have a proper idea about all these reasons to fix it.

What Does Maytag Washer F9 E1 Error Code Means?

The F9 E1 signal indicates that your washer has identified a longer drain time. This error number indicates that there may be an issue with the water supply or pressure, or that the washer is not emptying correctly.

Among other things, clogged drain hoses, unclean filters, shoddy drain system installation are the most common reasons for this.

Your washer will interrupt the current cycle when this code appears. Furthermore, unless the drainage problem is fixed, the washer won’t finish the wash cycle.

Troubleshoot And Fix For F9 E1 Maytag Washer

Troubleshooting the F9 E1 error code is not that difficult and just by following a few methods you can easily fix it without needing to spend 100’s of dollars.

1. Excess Suds (Run a Cleaning Cycle)

Adding excess amounts of detergent than usual is one of our common habits. This will produce too many suds inside the drum, resulting in jamming the draining system from time to time.

As a result, the water or existing residue cannot drain smoothly. And that is when the F9 E1 error code appears!

So it is necessary to make sure whether your Maytag washer is compatible with HE detergent or not. On top of that, regular detergent cannot be a good match with HE washers, which is likely to cause suds’ errors.

The best way to solve the issue with excess suds is to try a cleaning cycle. To do so, let the drum empty, incorporate an affresh washer, and start a cleaning cycle to eliminate existing suds.

But for those who have a front-load Maytag washer, simply keep the door open to let the interior dry, and then wipe the spot away using a damp cloth.

2. Blocked hoses and filters

One of the key reasons for F9 E1 code on your washer is blocked hoses and filters. So when the drain hose and filters are blocked, they cannot drain the water from the drum.

Over time these hoses and filters can get clogged up due to residual buildup on them. Thus, the first thing you will need to check is the drain hose at the back of the machine.

Open the hose and check for any blockages; clean it using a “Snake” tool and water. Also, make sure that the drain hose doesn’t go more than 4.5 inches deep into the drain pipe.

After checking the hose, move to the filters. The filter is located at the front of your Maytag washer, which is normally located in the machine’s bottom corner. Once you have access to the filter, open it and clean it using cool water

3. Check the drain pump

The F9 E1 error code may also be brought on by a faulty or blocked drain pump. A blockage in the drain pump, an impeller breaking, or an electrical malfunction can all lead to a malfunction.

Find the front panel by looking at the washer’s bottom. The location of the drain pump can vary depending on the model of your Maytag Washer.

Examine the pump for any dirt or foreign items that could be causing it to get obstructed, and then thoroughly clean it with water.

Also check if the pump is working properly using a multimeter; in case it seems damaged, you will need to replace it with a new one. The replacement cost can be between $25-$50.

4. Issues with the detergent

Using too much detergent on your Maytag Washer can also trigger the F9 E1 error code. Too much detergent can produce excessive suds, which can obstruct the washer’s ability to drain correctly.

An excessive amount of suds might make it harder for the washer to properly drain and rinse the clothing.

Stop the washing machine and move your clothes to another container. Then, clean the washer according to the manufacturer’s recommendations with a suitable solution, such as liquid bleach or Affresh.

After running a cleaning cycle to get rid of buildup, use a moist cloth to remove any extra detergent or cleaner residue that may have accumulated around the dispenser area.

5. Faulty/Damaged Lid Switch (Test/Replace the Switch)

The lid often fails to latch due to a worn-out locking mechanism. In such a situation, your Maytag washer cannot start or perform a draining properly. As it will not respond gently in terms of draining, you will surely get an F9 E1 error code!

Here, the solution to get rid of the situation is to simply check the lid switch’s condition using a multimeter. If you notice the meter has displayed a resistance of 0 ohms or close to it, stay assured that the lid switch is still okay.

On the other hand, if there is zero-to-little resistance after actuating the switch, it is time to replace the lid switch.

6. Reset your washer

If you have tried both fixes above and your Maytag washer still shows F9 E1 error then you might need to reset your machine. Resetting the machine is quite easy.

While your washer is turned on and the code is showing, simply unplug it from the power source and wait for 10 minutes.

After 10 minutes replug your washer and the error code should be gone and it should start to drain water normally.

Tips And Tricks To Prevent F9 E1 Error on Maytag Washer

If you wish to prevent the F9 E1 error on your Maytag washer from happening then these tips below will help you to do that.

• Always use manufacturer recommended detergent 
• Avoid putting too much detergent during the wash cycle
• Make sure to periodically clean the drain hose, pumps and filters. 
• Ensure that the water supply is sufficient in your washer as inadequate water supply can cause drainage issue
• Look for any leaks of water in nearby areas of the washer, as these might point to a broken hose or a drainage issue.

Please watch this video for more information.

FAQs

Following the above fixes should help you get rid of the F9 E1 error. However, if you still have some confusions our faqs below will help you clear them.

Final Words

Using your washer with any type of error code is never recommended as it can seriously damage the internals of your machine regardless of whether it is Maytag Washer F9 E1 or some other code.

Additionally, you must service your washer at least once every year with a professional to make sure it runs smoothly.