How to Fix Maytag Washer Clothes Still Wet?
Maytag washers are known for their reliability, durability, efficiency, and longer parts warranty. However, users often complain that their Maytag washer clothes still wet after completing the wash cycle.
In Maytag washers, after washing clothes basically stay wet because of spinning issues, faulty drainage systems, unbalanced loads, overloads, internal motor assembly problems, etc. These are not only frustrating but also a serious issue.
Here, to solve this problem some prior experience is required, but we will try to simplify it so you can easily follow them. So, continue reading.
Troubleshooting and Fixing Maytag Washer Clothes Still Wet?
Most of the time, washing machines dry clothes through the spin cycle at the end of a wash cycle. The spinning extracts as much water from the clothes and dries them.
To perform it effectively, several parts work together. But when any one of these parts doesn’t function properly, the washer can’t properly dry the clothes.
So, let’s discuss how to troubleshoot and solve this issue.
1. Spinning issue (Inspect the spinning rate and make sure it’s spinning properly)
During spinning, the drum of the washing machine rotates fast. It creates Centrifugal Force, which leads to the water being extracted from the clothes through the drum’s holes.
But if it doesn’t spin as fast as it used to, then the water from clothes can’t get out properly and they remain wet.
Usually, this spinning issue arises because of a faulty motor, an overloading washer, a damaged or clogged drain line, excessive suds, etc.
In this situation, to solve this issue, first check the suds quantity in the washing tub. If there are too many suds, then remove or clear them.
Next, make sure that the load is not too large or overbalanced. If needed remove some items or rearrange the load to make sure that it is evenly distributed.
Besides, clothes can get caught between the basket and the outer tub cover, which ultimately slows down the spinning speed. So make sure to check it.
If you have checked all of the above and your clothes still remain wet, then try the next one.
2. Improper drainage system (Check the drainage system parts and make sure they are all working perfectly)
This is the most common reason behind the clothes wet issue. Generally, through a drainage system, every washing machine removes its wastewater produced during the spin cycle.
Here, a drain pump sucks the water from the bottom and takes it into the drain hose. After that, the drain hose carries the wastewater away.
But when this system malfunctions, wastewater can’t get out and as a result, clothes remain wet after completing the wash.
To solve this issue, first inspect the drain hose. If the drain hose is kinked, straighten it out. But if the hose is clogged then clean it properly.
Next, inspect the drain pump filter, and if it’s clogged, clean it.
**The pump filter is designed to trap lint and other debris before it can enter the drain pump. When it becomes clogged, it can reduce the flow of water through the pump.
After that, test the drain pump to ensure it’s working or not. If it is found faulty, then replace it. This may cost you around $40 to $180.
To know how to test it, follow this video:
Here, if you don’t have a multimeter, there’s another way to check it. Just open the washer door and start a spin cycle. When the pump works properly, you will hear water draining out of the washer.
But if you don’t hear any water draining, or if the water is draining slowly, the drain pump may be faulty and need to be replaced.
3. Unbalanced load (Make sure your washing machine is balanced)
If the problem isn’t solved yet, and while spinning your washer is wobbling and making a strange sound, which means that your washer becomes unbalanced.
The biggest reason for this issue is its load. Basically, an unbalanced load means that the clothes in the drum are not evenly distributed. This can cause the machine to vibrate excessively, uneven/slow spinning, and make loud noises.
In order to solve this issue, don’t put all the clothes on one side of the drum. Instead, evenly distribute them. In addition, if you want to wash a large or bulky item, wash it separately or with a few smaller items.
Besides, ensure that you installed your washing machine on a level surface and it does not move when you use it.
Hopefully, this will solve the issue, but if not, try the next one.
4. Overloaded washer ( Don’t overload the washer )
It’s another common cause of clothes still being wet after a wash cycle. When the washer is overloaded, there is not enough room for the clothes to move freely and get dry.
This can also lead to the washer becoming unbalanced, which can cause the spin cycle to be less effective at removing water from the clothes.
To prevent your Maytag washer from overloading, be sure to follow the manufacturer’s recommendations for load capacity. You can find this information in your washer’s owner’s manual.
However, it is recommended not to fill the washer tub more than three-quarters full. This guideline is applicable to both front-loading and conventional top-loading washers.
5. Internal motor assembly issue ( Check each part and take necessary steps to fix any issue )
If the washer is not overloaded or unbalanced, but the washing tub isn’t spinning properly, and clothes are still wet, then your washer might have an issue with the motor assembly.
Typically, in this part, the most common issues are loose or worn drive belt, motor pivot problem, worn drive pulley, bad tub bearing, etc.
In this situation, you have to inspect all the mentioned parts and ensure they are all free of damage and working perfectly.
So at first, remove the drive belt and inspect it carefully. If you notice any damage or worn signs, replace it ASAP.
Next, while checking the drive belt, check the drive pulley and make sure it spins freely. But if it’s not spinning freely, it can cause the tub to spin too slowly or not at all. So, replace or repair it as required.
After that, inspect the motor pivots to make sure that it’s fine and moving freely. But if it doesn’t, lubricate it with a light oil or if needed replace it.
Additionally, check the tub bearing and make sure it’s not jammed or damaged. But if it is found damaged, then you have to replace it.
**N.B.: After trying all of these steps and your clothes are still wet after the wash cycle, the washer may have a mechanical problem. In this case, call a qualified technician to repair it.
How Do You Prevent Maytag Washer Clothes Still Wet Problem?
Till now, you might understand that solving this problem is not as easy as it seems and it may require time and money. But the good news is that you can prevent such problems if you follow some prevention tips.
Those are:
- Clean the drain hose and pump regularly
- Always use the right amount and type of detergent for the size of the load
- Avoid overloading the washer
- Balance the load carefully, especially if you are washing large or heavy items
- Choose the right wash cycle
- Don’t wash heavy and lightweight clothes together
- Clean the lint trap regularly
FAQs
Even though we’ve covered almost everything about the Maytag washer’s clothes-wet problem, you may still have unanswered questions. In this FAQ section, you’ll find answers to those questions.
How Long Does It Take To Resolve This Issue?
The time required to resolve this issue totally depends on the specific causes. Usually any simple issues, like a clogged drain hose, can be fixed within a few minutes. However, any complex issues may take hours or days to fix.
Does Maytag Washer’s Warranty Cover This Clothes Wet Issue?
Yes. Generally, Maytag offers a 10-year limited warranty for all major kitchen and laundry appliances made after 2017. Though they don’t specifically mention coverage for clothes-wet issues, the warranty still covers it.
What Is The Average Lifespan Of A Maytag Washing Machine?
Mostly the average lifespan of a Maytag washing machine is 11 years. But if you take good care of it and clean it regularly, you may be able to extend its lifespan to 12 years or more.
Final words:
Finally, you might have solved your Maytag Washer Clothes Still Wet problem. In fact, as a washing machine user, you’ll have to deal with several kinds of problems.
In these cases, you shouldn’t call the technicians first. Instead, search online for solutions and if any are found, try them. But, if you don’t find any, or if the problem still persists, then call an expert technician.