GE Washer Water Level Too Low: Why & How To Increase?

No wonder the traditional washer uses a significant amount of water for proper cleaning and garment care. But what if your GE washer water level too low or kind of feels like water is barely there?

Well you know most of the new GE washers are designed in a way that it doesn’t use a wash basket full of water for washing. But if that’s not the case, and you are feeling low water level, then it can be caused by several reasons. For instance, low water pressure, clogged screens of inlet valves or hoses, and so on.

Then what are the other potential causes and probable fixes to solve the issue efficiently, intrinsic to know? Today’s write-up is worthwhile to read as here, we’ll cover every pinpoint about the matter. So, read on.

Why Is There Low Water In The New High Efficiency GE Washer?

The new GE washers meet or even exceed the water efficiency requirement and the latest energy.

That’s why you may feel less water level in the new models than your prior ones. It is nothing to worry about! This is how this washing machine is designed!

The DOE or Department Of Energy sets the standards for water usage for washers and the allowable amount of water usage has been reduced over the years. And the GE washer is designed according to it.

That’s the reason you can’t even modify or make adjustments to raise the water level to the top.

Moreover, it is not recommended by the GE washer to add water manually to the washer. However, new models of the GE washer have a Deep Fill option to customize the water level.

[Note: It is recommended to use the Deep Fill feature for special usage, not for normal daily usage.] 

So, to get the average water level in the washer you can use the Deep fill option. There are two ways to do so-

• To add a little water: Before starting the cycle, press the Deep Fill button. It will add 3 gallons of water to the load. Once done, you can press it again to add 3 gallons more. 
• To fill the full tub: Here, press and hold the Deep Fill button for about 3 seconds to add a maximum level of water, for about 26 gallons approximately.

Reasons And Fixes For The GE Washer Which Water Level Is Too Low Than Usual Or Normal

As you see there is nothing to bother about if it looks like low water in the new GE washer. But if that is not the case, then it can cause concern.

There are several reasons that can cause the problem. What are they or even how to fix them? Let’s get to know about it.

1. Low Water Pressure

Generally, a washer is designed to use a certain amount of water pressure to fill the washer tub properly.

Your GE washer requires 20 PSI water pressure for proper water filling, otherwise, you will get less water.

So, check whether the water pressure of your house is normal. Moreover, inspect whether the washer is getting an adequate amount of water pressure to fill properly.

2. Clogged Screens Of The Water Inlet Valve And Fill Hoses

All the inlet valves of the washers have screens that prevent particles from clogging up.

For easier access or for added protection, the hoses have screens that can be clogged by debris. As a result, you will have water-filling issues. 

Here is how you can deal with the problem.

• Unplug the washer from the power source and turn off the water at the inlet faucets. 
• Now pull the washer away from the wall to get access to the back of the washer. 
• Locate the washer hose connections and you can locate the screen inside the fittings. 
• Clean the screens with clean water. You can use a soft brush to remove the sediments. Once clean, place the screens back in their place.

[Note: According to the GE, you may need to replace the screens if the sediments can’t be removed.]

3. Faulty Inlet Valve

It is a frequent cause for the washers to have a low water level. The inlet valve is the thing that opens and allows water to your washing machine from your home water plumbing system.

You know if the water inlet valve of the GE washer becomes faulty, you may experience slow water fill in the washer and, as a result, a low water level.

But you should keep in mind that the water inlet valves require sufficient water pressure to work properly.

That’s why before suspecting the inlet valves to be faulty, inspect the water pressure to be normal.

If the water pressure is normal and the screens are okay but the washer fills slowly, replace the water inlet valve.

4. Faulty Water Pressure Switch

A pressure switch in the GE washing machine is used to determine when the water level is correct during filling.

When the pressure switch of your washer becomes defective, it may not detect the water level accurately.

Then it shuts off the voltage at inlet valves prematurely. As a result, the water filling of the washer is disrupted, and ultimately low water levels.

• Step 1: Refer to the wiring diagram of your GE washer and locate the terminals of the pressure switch. 
• Step 2: Measure the voltage of the switch with a multimeter for the appropriate continuity. 
• Step 3: If the pressure switch of your GE washer is faulty, then replace it with a new one.

5. Malfunctioning Main Control Board

Another potential cause for the issue can be the malfunctioning main control board.

It is a crucial part of the GE washer that sends voltage to nearly all electrical components of the washer.

So, if the main control is not working properly, it may not send the correct signal to the inlet valve to fill the washer with the correct amount of water.

• So, check if the main control board is shorted out or has burned-out components. You can also use a multimeter to measure the voltage. 
• If there is an incorrect reading of voltage or no voltage, then it’s likely the board is damaged. You may need to replace it.

FAQs

Here in this section, we are going to cover some of the most asked queries of the users. Whether you are new or a long-time user, you can get a clear insight into some matters. 

Final Words

Well, by now, hope you get that all about the GE washer water level too low. Summing up the whole discussion, if your washer is new, then don’t bother with the water level as the GE washer is designed in that way.

But if the water level is too low than usual, then troubleshooting and fixes mentioned above can solve the problem. If not, then you should take the GE washer experts’ assistance as it may indicate complex internal problems.