Amana Washer Stuck on Wash: 6 Reasons You Mightn’t Know!

Undoubtedly, Amana has a reputation for some of their top-class washers and other appliances. But just like other high-end brands, it can also act up at times due to some specific reasons. 

The possible reasons why Amana washer stuck on wash include technical glitches, overheating, faulty inlet valve, & lid switch defects. A clogged drainage system & water inlet valve can also cause it to get stuck on wash.  

There is no need to start scratching your head after seeing the given issues! Today, we will also share the troubleshooting processes to help you solve the problem with ease. Stay tuned!

Troubleshooting and Fixing for Amana Washer Stuck on Wash

Here, you may need to diagnose each problem with Amana washer individually to find out why the washer gets stuck in the wash. Then, you need to take the next step wisely for troubleshooting.

This is not going to be easy to overcome Amana Washer’s stuck-on wash issue, especially if you have not faced it before. So let us help you out by disclosing the reasons along with the fixing:

1 – General Overheating (Let the Washer Cool Down)

Believe it or not, issues with overheating are considered the most common reason why your Amana washer may get stuck in the wash.

Not only during the wash cycle but the washer can also stuck in the middle of spinning and rinsing cycle due to overheating issues. 

Built-in sensors let the user know when their Amana washers become too hot by running constantly.

But you will not get any signal if the sensor is not working. And that is when the washer may stuck on wash!

The quickest way to solve the issue is to shut down the device and allow it to cool down. 

2 – Technical Glitch (Reset the Washer)

Technical issue is not something that happens with the Amana washer only. Even a high-end washing machine may also get messed up with glitches regarding technical, which is not in your hands at all!

And guess what? Because of a technical glitch, there is a high chance that your Amana washer has stopped responding on wash or mid-cycle. So here, a quick reset may solve the issue within no time!

All you need is to push and hold the “cancel” button in terms of clearing the remaining cycle.

However, if you are still failing to troubleshoot the technical glitches, try a master reset. To do so, unplug the washer>re-plug it after waiting for a while>open & close the lid 6x within 10-12 seconds.

Afterward, go for a small-load test to see if it is still stuck on the wash or not.

3 – Faulty Water Inlet Valve (Replace It)

In simple words, the water inlet lets the water maintain a constant flow inside the tub after receiving signals from the device. Most of the time, you will find it inside the washer, which can be located by opening the top. 

Over time, a water inlet valve gets corroded or excessively clogged. If that happens, not only you will end up with inconsistent water flow, but the Amana washer may also get stuck during the wash cycle!

We’d recommend calling a technician to check its current condition. If you can do it yourself and have ensured that the inlet valve has turned faulty, replace it immediately.

Here is a quick video to help you test the water inlet valve using a multimeter:

4 – Lid Switch Defects (Test/Replace the Switch)

The prime function of a lid switch is to deliver signals to the washer to indicate whether the door is open or closed.

As we often have to press this button every time we run the Amana washer, it tends to break or wear out quite frequently.

So if the lid switch stops responding, there is a chance that the washer will stay stuck on wash cycle.

By inspecting the lid switch from nearly, you can guess the condition of it to confirm whether it needs a straight replacement or not.

You can also get assistance from a multimeter to test the condition. If it needs to be replaced, go for it, and this should not cost you more than 20$, although it varies from model to model!

5 – Drainage Issue (Unblock the Drainage)

A blocked drainage system will not allow the water to pass back around the washer while needed.

So there is no rocket science that the Amana washer is stuck on the wash or mid-cycle if any foreign objects cause blockage on the drainage. 

And guess what? Sometimes, an excessive and unsuitable detergent that produces too many suds may also be an obstacle to proper draining. 

So, we guess a drain snake or plunger may come in handy to deal with a blocked drainage system.

It is wise to inspect other potential areas (e.g. filters). If you cannot do it yourself, call an expert.  

6 – Faulty Water Level Control Valve (Unblock/Replace It)

As the name suggests, the water level control valve is designed to control the washer’s motor, saving and maintaining the appropriate water level.

Being an automatic component, it can sometimes act up or stop working, which will result in being stuck on washing!

The common reason behind a water level control valve failure is clogging. So, to fix it, take necessary assistance from water and vinegar.

These can assist in dissolving the residue so that the washer can get into its desired condition.

In case it needs a replacement, do not think twice to consult a technician!

FAQ’s

Do you want to learn more about Amana washer and stuck-related issues? Well, keep on reading to find what other people may ask, including the most precise answers possible –

Final Words!

Issues with the Amana washer stuck on wash are not too many! But luckily, all of them are fixable by either yourself or professionals.

Before you get into washing, make sure the tub is not overloaded with clothes.

Because imbalanced loads may be a reason behind stuck-on wash, although it is rare.

Besides, if the wash has stopped in the middle, check if any loose clothes get clogged inside.