5 Core Reasons Why F8 E1 Whirlpool Washer Error Code Appears

Probably the annoying “F8 E1 error code” has brought you here as you do not know why it has come up, right? Well, you might not be the only Whirlpool user who faced it. In fact, we’ve seen many Whirlpool users searching for the valid reason behind its appearance.

Indeed, the F8 E1 Whirlpool washer error code appears due to a poorly connected inlet hose, clogged air trap pipe, and faulty water level sensor. Other potential reasons include a turned-off water supply valve and improper drain hose installation.

To let you get the maximum benefit from today’s write-up, we have also discussed the quickest and most effective ways to solve each problem. So do not go anywhere else!

What Does F8 E1 Whirlpool Washer Mean?

The F8 E1 refers to a particular code that will be visible around the Whirlpool washer’s screen.

Thus, it informs you that something is going wrong with the program or you might have made a specific mistake.

Among the several error codes, F8 E1 is a common error code that appears if there is any issue with the water supply. Furthermore, it is an indication that the washer is running poor water flow.

Troubleshooting and Fixing for Whirlpool Washer F8 E1 Error Code

As there can be so many different error codes visible on the washer’s screen, you cannot just pick up a single fixing guide to overcome the issue!

Rather, depending on the code and what problem you might be facing, the troubleshooting process will be varied.

So here, we’d like to help you out by disclosing why the F8 E1 Whirlpool washer may appear, including the effective troubleshooting guides:

1 – Poorly Connected/Not Connected Inlet Hose (Connect Properly)

The water inlet hose is what connects the machine and the water inlet valve to help you control the required water flow.

Moreover, Whirlpool washers mostly come up with built-in sensors to detect the current water supply.

But the hose must be connected securely to let the sensor work properly. Otherwise, an F8 E1 error code will be visible on the washer’s display.

So, for potential loose connections and kinks, make sure you inspect the inlet hoses carefully. Before you get into connecting them, power off the Whirlpool washer.

2 – Switched-Off Water Supply Valves (Turn them On)

To let you make use of cold and hot water for washing, almost every Whirlpool washer contains two different water supply valves (blue and red).

You must keep each of them open or turned on to maintain an appropriate spin and wash cycle.

If not, there is a high chance that you will end up with an F8 E1 error code. So make sure they are open and there is no issue with clogging.

The basic step to turn on the valve is to rotate the switches in the right direction.

For a practical view, you can watch the given video:

3 – Clogged Air Trap Pipe (Unclog It)

Over time, the air trap pipe of your Whirlpool washer tends to turn clogged.

Although it does not happen overnight, it is a common issue with some washer users that most of them face after months of improper use!

And guess what? A clogged air trap pipe can be the reason behind the F8 E1 error code.

Generally, lint, hair, greasy substances, and such combinations are the common particles that may clog the air trap pipe.

So make sure you are well aware of these unwanted substances while washing clothes. 

But in case the pipe has already become clogged, you need to take the pipe off after locating it.

Then, inspect for any potential blockages to cast them away. Finally, attach the air trap pipe again and check whether it is free or not.

4 – Inappropriate Drain Hose Installation (Install It Properly)

Not only do clogging and kinking cause trouble in drain use, but inappropriate installation can also be a huge bummer!

In fact, it is considered another reason why you get an F8 E1 error code in your washer’s display.

When it comes down to extending the drain hose, you should not go over 113/114 mm (4.5 inches) into the standpipe.

Experts prefer using “U-shaped” hoses in terms of obtaining the proper depth. While installing, make sure it is loose and at the same time, secure enough.

For optimal airflow, it is necessary to have a slight gap between the pipe and hose.

5 – Faulty Water Level Sensor (Inspect/Replace the Sensor)

Last but certainly not least, the water level sensor is what monitors the overall water condition inside.

Basically, it observes the amount of water around the washer and informs the control board to enable water flow or stop it while needed.

So if there is an issue with the water level sensor, it is very common to notice F8 E1 error code as it will restrict offering constant water flow feedback!

The best way to inspect the water level sensor is to take assistance from a multimeter.

To do so, you must locate the sensor area after switching off the Whirlpool washer. Unplugging the wires is equally necessary before you attempt to check.

If you notice the sensor is still failing to maintain continuity, replace it immediately before the next use.

FAQs:  

Still not finding the way to get rid of the Whirlpool washer F8 E1 error code? Take a look at the given queries to earn more education about it and other error codes on your Whirlpool washer –

Final Words!

There is no need to panic if you notice the F8 E1 Whirlpool washer error code, as you have gone through the entire post.

However, there is at least a slight chance that this error code will appear if there is something wrong with the control board!

In that case, we’d recommend examining it by consulting an expert. Because in some cases, a faulty control board needs to be replaced to solve the issue permanently.