Amana Washer Not Draining [Quick Guide]

Are you having trouble with your Amana washer? A common concern of many Amana users involves the drum not draining properly. And a lot of the time, a washer that fails to drain properly produces an unsettling, whirring noise.

Some common reasons behind an Amana washer not draining are – a bad drain pump, a blocked draining hose, and a malfunctioning lid lock assembly. Sometimes, all it takes is a simple reset to get the washer working again. Other times, you may have to fix or replace a damaged component.

Keep reading to find out more about how you can take care of the issue quickly!

Troubleshooting and Fix for Amana Washer Not Draining

Draining issues are very common with washers. Now, depending on the type and model of your Amana washer, the location of the components can be different.

It’ll be wise to check the manual or the labels on your washer’s body to locate it better. Some common troubleshooting ideas are described below.

1- System malfunction: Reset the washer

Sometimes, it’s just a system malfunction disrupting the regular spinning and draining routine of a washer.

If there’s nothing serious going on, you may be able to fix it with a simple reset, so let’s start from there.

To reset, you need to unplug the washer first. Then, wait for a minute or so before plugging it back again. Finally, you need to lift the lid six times. This should reset your Amana washer.

2- Issue with the drain pump: Check and replace the drain pump if needed

The drain pump of your Amana washer is responsible for getting the rinse water out through the drain hose. If the pump goes bad or gets obstructed, it can halt the draining procedure. 

To be sure, you have to inspect the drain pump first. You can take the drain pump out to check for blockage. If there’s any, getting rid of it should solve the ‘not draining’ issue. 

If you don’t see any blockage, next, you should check if the drain pump is in perfect working condition. 

To do that, just take it out and check with a multimeter for continuity. If there’s none, you may have to get a new pump. 

You can get a clearer idea from this video below. Check out how the user checks and changes the drain pump.

3- Drain hose is clogged: Inspect and clear the drain hose

Another common reason behind an Amana washer not draining is a clogged drain hose. The drain hose of your washer needs to be working right to get the dirty water out. 

You need to fix this ASAP to solve the draining issue. Start by checking the condition of the hose. If it is twisted or kinked, see if you can straighten it out. 

Otherwise, you may have to take it out to clear the blockage. You can use pressurized air or flowing water to get rid of the obstruction. 

If you find the drain hose in an irreversible condition, replacing it would be your best choice. A new hose can cost you around $50-$60.

4- Faulty control board: Check and replace

The control board is responsible for distributing voltage to all the components of your Amana washer. If it becomes faulty, it can disrupt the performance of the washer, including the draining cycle. 

We found from the Repair Clinic that some parts of the control board can get burned or shorted. In that case, you will need a new control board to replace the old one. 

Make sure to unplug the washer before you start. Also, you must place all the connectors in their accurate terminals. If you are not confident about doing it alone, consider taking help from an expert.

5- Malfunctioning lid lock assembly: Check and replace if needed

Sometimes, the lid lock assembly malfunctions due to getting clogged or going bad. Anything wrong with any part of this assembly can cause the washer to stop spinning and draining. 

You need to carefully check it for signs of damage. You can simply order the damaged part according to your model number and replace it to fix the issue. It can cost you around $50 and is not difficult to replace yourself.

6- Bad drive belt: Check for damage and replace

A bad drive belt can also cause an Amana washer not draining issue. The drive belt, powered by the motor, rotates and turns the drum. If it goes bad, it can disrupt the spinning and draining procedure of your Amana washer. 

Moreover, a damaged drive belt sometimes creates disturbing noise or vibration when the washer runs. The best course of action would be to check the drive belt first. If it is worn out, replace it.

7- Damaged suspension rods: Replace the rods

If your top-load Amana washer is not draining, it can be due to one or more damaged suspension rods. These rods are there to balance the movement of the washer tub.

As your washer ages, these rods can wear out. This can unbalance the drum and interfere with the spinning or draining mechanism of your Amana washer. 

To solve the issue, first, you need to access the suspension rods. Check all the rods for signs of damage. Replace the rod to fix the issue.

Expert Tips To Maintain Your Amana Washer For Max Efficiency

Since Amana washer is an electrical appliance, it’s normal for it to run into problems from time to time. 

However, not all problems are severe and worth losing your sleep. Take a look at these expert tips that may help maintain your Amana washer better.

• Run the ‘clean washer cycle’ every thirty washes or once every month.
• Refrain from using too much detergent. 
• Take immediate action when faced with any leakage issues. 
• Select the right temperature according to your clothes while running the washer.
• Always ensure that the door/lid is properly locked before you start the cycle. 
• Don’t overload your washer or pack it with too many clothes at once. 
• Try to leave the door open afterward to dry the washer properly.

FAQs

Without the draining function of your Amana washer working properly, you will find your clothes submerged in rinse water. Many people face this issue and surf the internet looking for quick solutions. Let’s check out some common queries.

Final Words

Amana washers are known for heavy-duty construction and top-notch performance. But you can’t avoid running into trouble while using an electrical appliance like a washer.

Although most of the steps mentioned here to fix an Amana washer not draining issue are quick and easy to try yourself. Don’t hesitate to consult an expert when you face difficulty diagnosing the issue.