Maytag Washer Making Grinding Noise: 4 Reasons & Their Fixes

Maytag washer is a common name in households and they are quite reliable but just any other washer they can also cause some problems. One of them is grinding noise.

The grinding noise in your washer can be caused by worn out tub bearing which gets damaged automatically over time. Another key reason for this noise is overloading the drum with more clothes than its capacity which prevents the cloth from spinning freely.

These are only two of the reasons and there can be other reasons causing this. So, keep on reading to know more.

Is It Normal For Maytag Washer Making Grinding Noise

A little noise of the motor is normal for any Maytag washer and the motor can at times emit a sound when it changes directions.

You could also hear some equipment noises. These noises are typical during washer operation.

However, when this noise gets louder and you hear grinding noises, It’s definitely not normal.

Therefore, it is advised to stop using your Maytag washer and figure out what’s wrong if it starts generating a grinding noise. Examine the washer’s surrounding area and the drum for any noticeable obstacles.

Troubleshoot And Fix For Maytag Washer Making Grinding Noise

Grinding noises from your Maytag washer can be quite annoying and it can prevent the washer from cleaning your clothes properly. So, before this issue gets worsen up you should troubleshoot and fix it asap.

1. Overloading –

Sometimes, all of the components in your Maytag washer may be working fine but it is still making grinding noise. Well this can happen when you overload your washer.

When you put clothes in your washer, they need enough room to spin around freely and spinning action is what actually cleans them.

But, if you end up overloading your machine the clothes get stuck and the motor cannot spin freely which leads to this grinding noise.

For information on correct loading and how many clothes to wash, see the Owner’s Manual.

2. Worn Out Tub Bearing –

If you are not overloading your washer but it still makes noises then you will need to check the tub bearing.

These bearings support the drum and help them rotate but over time can wear out causing grinding noises.

To see if the bearings are the issue or not, check the drum and try to spin it; if it seems too loose then you probably have issues with the bearings.

Next thing you should check is if the basket returns to its original position when lifted up.

If the basket seems loose and doesn’t quickly return to its original position then your bearings need replacement.

Replacing the bearing is not that difficult and you can do it yourself. The tub bearing for front-load washers is fixed to the back of the outer tub, whereas the tub bearing for top-load washers is attached to the bottom of the tub.

The replacement parts can cost anywhere between $14-$50 depending on your washing machine model.

3. Failed Motor Coupling –

A potential source of a grinding noise in a Maytag washer is a failed motor coupling. In order to fail in the event of overloading or extreme stress, the motor coupling connects the drive motor to the gearbox.

This design prevents the drive motor or transmission from more serious and expensive damage.

The motor connection, however, might malfunction and cause grinding noise when the washer is operating.

When you have a failed motor coupling you will need to replace it with a new one.

Replacing motor coupling can be a bit complicated and it’s better to take help from a professional mechanic and the cost can be between $90-$150 including labor and parts cost.

4. Problematic Drive Pulley –

Almost all Maytag washers come with a drive pulley system and when there is a fault in this drive belt, it can also lead to grinding noise.

A worn-out or damaged belt can slide, move around, or even break, resulting in performance and noise problems.

The drive belt is positioned at the bottom of the washer, so you will need to access the bottom of your washer and check this belt for any damage. If you notice the belt is loose, simply tighten and align the belt.

However if the belt is damaged beyond repairing, you will need to replace the belt. The replacement drive belt can cost between $8-$10 but if you opt for a professional service, the cost can be between $120-$180.

Maintenance Tips To Prevent Problems On Maytag Washer –

It’s essential to follow proper maintenance tips for your Maytag washer to ensure its durability and smooth functioning.

• Keep the door seals checked as they tend to become loose and worn out over time.
• Avoid overloading the washer and follow the instruction manual to check the maximum load.
• Ensure that the washer is level and resting on a solid surface. Excessive noise and component wear can occur from an imbalanced washer.
• To prevent damage to your Maytag washer, check the hoses and connectors every five years for bursting, splitting, and breaking.
• As suggested by Maytag, only use high-efficiency (HE) detergent.

Video Guide –

FAQs

Do you still have questions related to grinding noise on your Maytag washer then read our FAQs below to clear out all of your confusions.

Final Words

If you notice your Maytag washer making grinding noise it can be a serious problem and you will need to fix this asap.

Following the proper maintenance schedule can help you prevent this issue beforehand.

Additionally, only use the recommended detergent by the manufacturer and avoid putting too much clothes together in your washer.