Frigidaire Gallery Dishwasher ER Code: What It Means & How To Fix It?

Having your Frigidaire Gallery dishwasher stuck with a constant ER code can be troublesome. Not knowing what it means won’t help you diagnose and fix the issue with the dishwasher.

Generally, ER code pops up when some control keys become stuck or the touch membrane in your dishwasher is damaged for some electro-mechanical reason.

However, you can the ER code at home provided you pinpoint the exact cause and troubleshoot it. Go through this article till the very end to learn all about the Frigidaire Gallery dishwasher ER code.

What Does ER Error Code In Frigidaire Gallery Dishwasher Mean?

There could be different scenarios while your Frigidaire dishwasher shows the ER code on the control display. Sometimes the ER code is displayed with a small “s” beside it.

This error code means the control switch or keys are shorted. However, in most common cases, the Frigidaire dishwasher throws the ER code along with signs of “clean” “Drying, “washing “and “Dirty” on display.

It means the control board detects one or multiple keys on the touch membrane of the dishwasher have been kept stuck at the pressed position. Officially it is known as “membrane switch failure” or “sticky kyes”.

This can happen for various electro-mechanical cruises of the keypad assembly or the control board itself. When the ER code appears in the Frigidaire Gallery dishwasher, the touchpad or control keypad becomes unresponsive.

No other function acts when you press any key on the keypad while having the ER code on display.

What Causes ER Code In Frigidaire Gallery?

Before deciding what to do next, you might want to take a look at the following causes for the ER code on a Frigidaire Gallery dishwasher.

1. Steam Leak In Electronic Control Module

The Frigidaire dishwasher has been reported to have an improper seal ring in the control keypad. Hence, steam generated over time while a wash cycle accumulates inside the electronic module.

As a result, the connecting wire ribbon of the keypad becomes corroded staying in contact with moisture, and becomes unresponsive after a while.

2. Overaging & Abrasion Inside Keypad

Sometimes, some minor issues inside the console assembly trigger the ER code on the Frigidaire dishwasher. This includes loosened console screws, temporary moisture interruption on the wire harness of the console, etc.

How To Fix Frigidaire Gallery Dishwasher ER Code?

Knowing the causes for the presence of ER code on the Frigidaire dishwasher, let’s look at the possible troubleshooting process before calling a mechanic.

1. Try Soft Resetting Your Dishwasher

You might start with a generalized process to get rid of the ER code in your Frigidaire dishwasher. Switch off the dishwasher and unplug it or shut down the circuit breaker.

Let it be for around thirty minutes and restart it. Start a rinse cycle and check if the ER code pops up after some time.

2. Cleaning Off The Module

If resetting doesn’t work, you can try cleaning off the keypad console without pulling it off. As the ER code appears, start wiping the touch panel rapidly for a while.

This process helps to generate heat and clear any moisture interruption inside the panel. When the “Delay” sign appears, press and hold the “Start” button for 3 seconds to clear it from the display.

Afterward, run a rinse cycle as a follow-up. If the problem exists, you need to go inside the console panel and control board. Be advised, you might want to check if your dishwasher is under warranty or not.

Because opening up the dishwasher will void the official warranty of the product. Firstly, unscrew all the fasteners from the front panel, slide it down, and get access to the touchpad assembly.

You can try blowing warm air from a hairdryer from a safe distance as it will remove any moisture present inside.

3. Disconnecting Problematic Key

This is a temporary fix for the ER code issue. It only allows you to determine which key in your touchpad console is stuck causing the control board to display the ER code.

Start by using a regular kitchen knife to remove the panel that is directly above the buttons. Although it appears tricky, it is adhesive and will stick back down once you’re done.

First, cover the contact surfaces of all the keys you don’t use, save for one, using a single sheet of electrical tape. Next, reveal the faulty button by partially covering the suspicious button’s contact.

Because you require contact for the button to work but don’t want it to give you an error code, you might have to play around with tape positioning on the buttons.

Peeling up the sticky keypad, starting the washer, and leaving it loose for the duration of a cycle is a good test. It confirms that one of your keys has an issue. You can use your washer this way until you replace the keypad.

4. Replacing Touchpad/Keypad Console

The only way to remove the Frigidaire Gallery dishwasher ER code is by replacing the entire unit of the keypad console. For this, you have to buy a new one worth $60-$180 depending upon the model.

Take off the whole front cover of the washer, followed by pulling off the cover of the control board and touchpad membrane. Disconnect the keypad console from the control board by removing the wire ribbons.

Remove the touchpad peeling it off the dishwasher panel. Lastly, reinstall the new keypad assembly by carefully putting the wire ribbons inside the control board. Reassemble and restart your dishwasher to confirm.

How Can You Prevent ER Error In A Frigidaire Gallery?

You can follow some basic preventive measures to avoid ER code in your washer shortly.

• Avoid putting overstress on the washer.
• Be gentle while pressing the keys on the touchpad.
• Regularly clean the keypad.
• Try to keep your washer in a less humid place to avoid moisture accumulation.
• Clean the contacts between the keypad and control board to avoid corrosion.

FAQs

To find out more about the Frigidaire Dishwasher ER code, you might like to review the following questions and their answers.

Final Words

We hope you quickly fix your frigidaire gallery dishwasher Er code now that you know of all the potential causes and solutions.

However, it is recommended to seek help from a professional if you need to replace or repair the electronic parts.