What Causes E1 F3 Maytag Washer And Their Fixes?

Maytag washers come with an inbuilt protection system that shows many different error codes in case of emergencies. These codes allow users to identify the issues and fix them to keep their machines running. One such code is E1 F3.

The E1 F3 error code typically indicates that your Maytag washer cannot detect the water level inside the machine. This can happen due to many reasons like bent hoses, damaged sensors and more.

So, when this error occurs your washer cannot operate properly and you should fix it to prevent any larger problems.

What Does Error E1 F3 Maytag Washer Means? –

A pressure sensor or water level sensor issue is usually indicated by the E1 F3 error code on a Maytag washer.

During a wash cycle, this sensor is in charge of determining the water level in the washing machine.

Hence, your washer will display the E1 F3 error when it is unable to precisely identify the water level.

Also, your machine door will remain locked when this code appears as it cannot drain the water properly.

So, fixing the issue becomes important as your washer will remain unusable until you fix this error code.

Troubleshoot And Fix for Maytag Washer E1 F3 Error Code

When the E1 F3 error code comes up on your washing machine, it can be quite annoying as you won’t be able to run your machine. Luckily, this issue is fixable and you will need to check a few different things for it.

1. Damaged Pressure sensors –

Maytag washers come with a pressure sensor. So, the first thing you need to check is the pressure level sensor. This sensor sends a signal to the control board about the water level.

So, this prevents the washer from overheating and initiates the water draining procedure. It is situated between the air trap and the pressure switch.

Open the sensor and clean it and see if it works now however if it doesn’t fix the issue you will need to replace it with a new one. Replacement sensors can cost anywhere between $14.55-$20.00.

2. Damaged Water level sensor –

Just like pressure sensors, Maytag washers also come with water level sensors. This sensor measures the water level on your Maytag washer and sends direction to the control board accordingly.

Thus, when it malfunctions it cannot detect the water properly initiating the error code. So, you will need to check and troubleshoot this sensor.

Water level sensor is usually placed under your washer but unlike the pressure washer it’s harder to detect; you can either take help from the instruction manual or consult an expert.

The replacement cost for this sensor can be anywhere between $120-$140.

3. Bent or problematic Hoses –

Verify whether the washer’s water supply is having any problems. Less water may be entering the machine because the hoses may be twisted and kinked. So, if this happens it can also trigger the F3 E1 code.

As a result, you must confirm that the water entry valves are fully open and operating as intended. So, you will need to find the hoses and open them up for inspection.

Check the hoses for any physical damage or any blockages; clean them properly and if they look damaged, you should replace them.

The valves can cost anywhere between $5-$15 each and labor cost can be from $80- $100.

4. Blocked Air Trap Pipe –

Your washing machine can have air trap pipes clogged, which can result in a number of problems like drainage issues, water leakage, and error codes like E1 F3.

It sends the incorrect signal to the control board when it becomes clogged because it senses the incorrect water level in the drum.

To clean this clogged pipe, you will need to use a pipe cleaning tool called “Snake”. You can also use cleaning solutions to unclog blocked air pipes in your washer.

Clean the pipe properly and reinstall it in your washer and check if the code goes away or not. If it doesn’t go away you will need to check the CCU.

5. Faulty central control unit –

Another major problem can be the central control unit itself, the CCU is responsible for operating your whole washer. It takes signals from all the sensors and decides accordingly.

So, when it malfunctions, many error codes like E1 F3 can come up to protect the machine from becoming damaged. It’s possible that this central control unit is aged or has seen power spikes.

Unfortunately this is an issue that requires help from expert technicians and cannot be fixed by yourself.

Depending on the severity of the issue, CCU can either be fixed or replaced and the cost can be anywhere between $270-$350.

Tips And Tricks To Prevent E1 F3 Error on Maytag Washer

The E1 F3 Maytag washer error can get pretty serious at times so you should always follow a regular maintenance schedule to prevent this error.

Our tips and tricks below help you to keep your washer running smoothly.

• Keep your Maytag washer clean and remove any soaps or residue to prevent any blockages.
• Verify that the water inlet valves are fully open and operating as intended.
• Take help from an expert for periodic maintenance of your washer.
• When applying chemicals such as fabric softeners, use caution. Certain additives may produce excessive suds, which could result in issues for the water level sensor.

FAQs

The E1 F3 error code on your Maytag washer is not that difficult to fix but if you are still having some questions, our FAQs below will help you clear all of your questions.

Final Words

Error codes are normal in washing machines and over time many parts like sensors can deteriorate or pipes can get blocked which can trigger the E1 F3 Maytag washer error code.

Regular maintenance and proper cleaning of your machine can help you make it last longer and prevent many of these codes from occurring.