Kenmore 90 Series Washer Not Spinning? Try These Fixes!

Kenmore-90-Series-Washer-Not-Spinning-reason

Kenmore 90 series is one of the best-selling washing machines made by Whirlpool. However, a common issue that has panicked many owners is that the washer often doesn’t spin at all. 

But why is the Kenmore 90 series washer not spinning?

Most commonly, this issue is caused by a worn or loose drive belt. In addition, a defective lid switch, faulty motor, or control board can be responsible for this.

No matter what the cause is, the only thing you want is to get your machine running again, right? So let’s throw your headache out.

Troubleshooting And Fix For Kenmore 90 Series Washer Not Spinning

As we hinted at in the beginning, the Kenmore 90 series washer not spinning issue is mostly associated with faulty, damaged, or defective parts or systems.

Fix For Kenmore 90 Series Washer Not Spinning

In this sense, fixing the issue typically necessitates an expensive repair or replacement. To figure out what part is the main culprit in your case, read the following section carefully.

1. Inspect the Lid Assembly

A defective lid assembly is the most common but simplest way to fix the reason behind the washer not spinning issue. The lid assembly of your Kenmore 90 series washing machine is equipped with a switch.

Kenmore 90 series Inspect the Lid Assembly

This is a safety feature implemented to prevent your washer from spinning unexpectedly. That means when the lid is open, the control unit won’t allow the washer to spin.

Due to any physical obstruction or defective door latch, the lid might not be closed properly. In this case, the washer won’t spin, no matter how much you try.

Here, closing the lid properly might get your washer spinning again. However, if the lid is completely closed, but the washer still isn’t spinning, it indicates there’s something wrong with the lid switch.

In such a case, replacing the lid switch unit is the only option to get rid of the issues.

2. Repair Motor Control Board

The motor control board is such a crucial element that you can compare it to the brain of your washing machine. 

Kenmore 90 Series Repair Motor Control Board

It plays the important role of sending voltage to the motor as you turn the switch on. So, it’s apparent that any malfunction in the control board will prevent your machine from spinning.

The most common cause of a malfunctioning motor control board is a burned-out circuit. Otherwise, the typical electrical failure could be to blame.

Generally, you will notice a visible sign burning out on the control board. If the control board shows no sign of burning, you can check the voltage output using a multimeter.

3. Inspect the Motor Coupling

Kenmore 90 Series Inspect the Motor Coupling

The connection between the motor and washing machine transmission is established by the motor coupling. The main purpose of the motor coupling is to prevent damage to both components in the event of an overloaded washer.

In addition, normal wear can also cause a breakdown in the motor coupling. To determine if it has been damaged, conduct an inspection of its condition. If any breakage is detected, immediate replacement of the motor coupling is advised.

4. Investigate the Rotor Assembly

The rotor is responsible for propelling water out of the tub. When this component is damaged or fails, the washer won’t spin.

To troubleshoot this problem on your own, you can take several steps. Begin by checking the levelness of the washer, as an uneven surface may disrupt its spinning mechanism.

Additionally, try cleaning the rotor assembly using a soft cloth to eliminate any obstructions.

If neither of these methods gives positive results, you must seek help from a qualified repairman who can assess and resolve the issue with your washer.

5. Check the Drive Belt

Your Kenmore 90 series washing machine consists of a rubber belt that connects the drum to the motor and initiates the rotation of the drum.

This belt is known as the drive belt. Since the drive belt is made of rubber material, stretching or being damaged over time is a common phenomenon. Alongside, it can sometimes loosen or snap as well.

In any of the instances, your washer won’t spin. So, you should check the drive whether it’s loose or damaged. If so, you have to replace the belt.

6. Explore the Tub Unit

Have you ever noticed your washing machine making a rumbling noise as if its washer is starting but fails in the end? If yes, you have some tough tasks in front of you.

This situation is related to the tub unit, which consists of some specified components.

So, start the bearing that keeps your washer running smoothly. If the bearing is broken or locked up, the washer won’t spin.

Then, look at the seal and bearing kit that keep the drum moving right and stop water from going everywhere. If you find the seal or bearing kit damaged, replace it immediately.

Additionally, the rear drum contains bearings that ensure smooth operation of the inner tub, but these can also fail.

Consequently, the washer might fail to spin. Like before, replacement is the only option here. However, we recommend getting it done by expert technicians.

7. Check if the Clutch is Bad

Your Kenmore 90 series washing machine has a dedicated component to ensure a smooth transition of the agitator’s speed. In other words, it ensures a gradual speed increment instead of a quick shift.

We’re talking about the clutch assembly. This component can also be damaged or fail over time.

As a result, the washer won’t be able to spin. On such occasions, your washer may create a loud grinding noise or a burning smell due to overheating.

Unfortunately, this component is also not repairable. So, get a brand new one and install it. Hopefully, this will work.

Maintenance Tips to Prevent Washer Not Spinning Issue

No matter how old your washing machine is, it’s always precious to you. And, of course, you don’t want such equipment to become responsible for an unnecessary expenditure.

Luckily, with a little maintenance and care, you can protect your washing machine from such an issue in the first place. So, check out the following tips:

  • Try to keep the basket drive aligned by maintaining the proper water level
  • Avoid overloading the machine, as it can result in unexpected motor failure. 
  • Keep the area outside the washing machine and tub clean. 
  • Always turn off the switch after each washing session. 
  • It’s always wise to use genuine replacement parts purchased from the manufacturer. 
  • Make sure the lid switch isn’t locked or blocked by debris.

FAQs

The complex mechanism of washing machines always has something new to know. If you’re curious about learning something more about the issue, check the following FAQ section.

Why is my Kenmore 90 series washer not spinning fast enough?

Generally, the washer spins slowly when the load is too small. Alongside this, any obstruction in the spin cycle can also cause the issue.

Why won’t the Kenmore washer spin or agitate just buzz hums?

In such a scenario, the first thing you can suspect is the lack of power supply. Additionally, a damaged drive belt, a defective lid switch, or transmission failure can lead to this issue.

How to reset Kenmore 90 series washing machine motor that is not spinning?

The first thing you have to do is unplug the power supply. Wait for a minute or two, and then plug the power back in. Now lift and close the lid 6 times within 30 seconds. This will reset the motor.

Conclusion

As you can see, several potential causes can be responsible for a Kenmore 90 Series washer not spinning. By promptly identifying and addressing these problems, you can save yourself the hassle and expense of replacing your washer.

If you are unsure how to troubleshoot or fix these issues, it is always recommended to call a professional washing machine repair technician.

Remember, regular maintenance and care can prolong the lifespan of your washer and keep it running smoothly for years to come.

Similar Posts