Kenmore Elite Washer UE Code [Why Appears And How To Fix?]

The Kenmore Elite washer is a common household name around the world but the washing cycle can get disrupted if you suddenly notice the UE code. All smart washers have a pre-built function to throw an error code in ease of any emergency issues.

The Kenmore Elite Washer UE code means that your washer cannot complete the spin cycle as it is an unbalanced load. It can be caused by reasons like undistributed load, unbalanced washer, and many more.

So, if your washer is showing this error code and you cannot run your washer you will need to fix this before it continues to normally work again.

What Does Kenmore Elite Washer UE Code Mean?

Kenmore Elite Washer can show up two types of code that looks similar but means slightly different thing; the first is uE and UE.

In most cases, when the washer detects an unbalanced load it first shows the UE code and the control board tries to add water to rebalance the system to keep it spinning.

It will try to do this at least three times but if it fails even after that then the UE code comes up.

So, when the UE code comes up it means your washer is unbalanced and the spin cycle stops so your washer won’t run back again before you fix it.

Thus, your Kenmore washer will need manual fixing to get rid of this error code.

Troubleshoot And Fix For UE Code on Kenmore Elite Washer

As soon as the UE code comes up on your Kenmore washer, it can no longer run so it becomes important to troubleshoot this code to keep it running back again.

1. The load is too big or small

One of the main reasons for this UE code is that your washer load is either too big or too small. An uneven load is produced when you place too many or too few clothes in your washing machine.

The quantity of goods you place in your washer matters. This ultimately results in problems with your washer’s spin cycle.

So, when this happens the control board cannot rebalance the load even after trying several times.

To fix this take off a few clothes and put the cycle back in Rinse/Spin mode. Moving forward, fill the basket with loose stuff rather than packing it down and adding additional clothes.

Additionally, carefully read the instruction booklet and only fill the load as recommended; never fill the load with more garments than suggested.

2. Unbalanced Washer

Another common reason can be an unbalanced washer, you need to make sure that your washer stays level to the ground. If your washer is not level on the ground at all sides then it cannot spin properly.

It is very easy to detect if your washer is not properly balanced; if you see that your washer is vibrating too much during the wash cycle then you will need to check below your washer.

Apply pressure at the washer’s upper corner to verify this. If it wobbles, your Kenmore washer isn’t steady.

Verify that the washer is positioned on a level surface and, if required, adjust the leveling feet. You can use a wrench to turn them on all sides and make sure it is level on all sides.

3. Damaged suspension rod

Even if your Kenmore washer shows UE code after distributing the load evenly, then there might be some internal problems with the machine. You will need to check the suspension rods inside of the machine.

If you hear the washer’s tub thudding against the cabinet when it’s in spin mode, the main problem is the suspension rod.

It is not easy to replace the suspension rods by yourself so you should take help from an expert technician and all four rods need to be replaced even if one of them is damaged.

You can expect to pay between $100-$350 for this suspension rod replacement.

4. Damaged the shock absorber

Kenmore washers also come with shock absorbers known as dampers which absorb the excess vibration during the wash cycle.

Balance problems and trouble codes can occur if one or more of these shock absorbers sustain damage or stop working.

So, in case of shock absorber damage, you will need to consult a professional mechanic to take a look into your washer. The replacement can be anywhere between $150-$350.

5. Problematic control board

If you have tried all the above fixes and your Kenmore washer still displays an UE error code, then unfortunately the control board could be the issue.

The electronic control board is responsible for controlling the entire operation of your washer,

So, when it malfunctions, many error codes can come up and you will need to replace it or fix it.

It is not possible to fix this by yourself as the board consists of complicated wirings and circuits. Fixing it can cost anywhere between $200-$300.

Tips And Tricks To Prevent Kenmore Elite Washer UE Code

Regular maintenance is the key to preventing most issues with electronic appliances. These tips and tricks below will help you prevent error codes on your washer.

• Make sure your washer stays level to the ground
• Never overload your machine and follow the instruction manual to find the maximum load capacity.
• You can use shock-dampening mats below your Kenmore washer to absorb excess vibration during the spin cycle.
• Always balance the load inside the washing basket

FAQs

If you still have some questions regarding the UE code on your washer, our FAQs will help you find the answer.

Final Words

The Kenmore Elite washer UE code should be taken seriously as your washer will stop its spin cycle when it comes up. But, regular maintenance can help you prevent it in the first place.

Additionally, It is recommended that you should get your washer checked at least once every year by a professional technician to keep it running for a long.