How to Find GE Dishwasher Fuse Location [2023]

Sometimes, your GE Dishwasher can suddenly stop working. Everything looks okay, but it won’t turn on. This can be due to a broken fuse. But how to find the GE dishwasher fuse location when it needs replacing?

The fuse on a GE Dishwasher is usually present in the control board. The control board is generally in the dishwasher’s top or bottom section. The fuse is normally present under the front control panel.

In this article, I will show you the complete process of finding and replacing the fuse on a Dishwasher. So, let’s get started.

Model Wise GE Dishwasher Fuse Location

The fuse in your GE Dishwasher is in its control board. Depending on the Dishwasher type, this can be present on the top of the front of the dishwasher.

However, some old models have fuses at the bottom of the unit, connected to their control boards.

There are two different types of Dishwashers, having a top and front control panel. I have listed the fuse locations of different GE Dishwashers based on their types. Looking at the model number normally reveals this.

The table below should help you locate the fuse based on its model.

GE Dishwasher Range	Type	Where to Find Fuse
PDT-XXX-XXXX	Top Control	Under Top Control Panel
PDP-XXX-XXXX	Top Control Profile	Under Top Control Panel
GDF-XXX-XXXX	Front Control	Under Front Panel
GDT-XXX-XXXX	Top Control	Under Top Panel
GPT-XXX-XXXX	Portable Top Control	Under Top Panel

You should be able to locate the fuse easily using your dishwashers model number. To find it, consult the manual or the sticker at the back. Then, compare the first three letters to find the fuse location.

How to Tell if the Fuse in a GE Dishwasher is Faulty/blown?

You can tell if a fuse in a GE Dishwasher is faulty by checking its continuity. It means the fuse can conduct electricity and is not blown.

To test this, connect a multimeter to both ends of a fuse. A reading that does not change indicates that you have a faulty fuse.

Oftentimes, a faulty or broken fuse is the reason why a Dishwasher cannot power on entirely. You may not see any lights turn on, which indicates the Dishwasher cannot connect to the power source.

And since the fuse is in direct connection with the mainboard, a problem with it will stop the washer from powering on. But thankfully, you can buy replacement fuses directly from the GE parts website. They are readily available to purchase.

How to Replace Fuse on GE Dishwasher?

You can buy replacement fuses for your Dishwasher from many websites. But we would recommend using the GE parts website. Search for the fuse using the Dishwasher model number.

Once you have the replacement fuse with you, this is how you can replace it.

• Locate the position of the control board in your Dishwasher. Normally, it is at the top, but for some models, it is placed at the very bottom.
• Open the front panel and take off the screws from the sides. Using a  Phillips head screwdriver will work fine.
• Pull the front cover to remove it. You will be able to see the control board now.
• Take off the plastic casing for the control board. There are tabs that hold this in place. Pressing them should release the cover.
• Remove the two wires connecting the fuse.
• Press the clips in the mainboard to release the fuse. Pull it, and this should come off.
• Place the replacement fuse in the fuse holder.
• Connect the two wires to the fuse. 
• Place the control board cover and push it to secure it in place.
• Insert the front cover and screw in the front panel securely.

You have successfully replaced the fuse of your Dishwasher. Power it on and see if the control panel LEDs light up properly. That should indicate it is up and running.  

Tips To Keep Your GE Dishwasher Fuse in Perfect Working Condition

It is not often that the fuse in your Dishwasher gets damaged. Keeping some safeguards in check would not only keep the fuse safe but also help the dishwasher run for a long time.

Check the Dishwasher Circuit

The fuse in your Dishwasher is a safety device. It protects the control board and other electrical components from an electrical surge. So, if a fuse is blown, that can mean there is some electrical fault in your electric supply.

Then it is a good idea to bring a technician and have the circuits checked. Look for the main circuit breaker and see if they are tripped. Also, look out for the condition of the fuse in the Dishwasher power socket.

Use a Surge Protector

Sudden changes in voltages will affect your Dishwasher. Though modern units come with protections built in against these events, taking preventative measures will always protect you from any adversity.

A Surge protector blocks any current that is not within its safe allowed limits. Plus, there is a fuse built in that will melt to isolate all the connected devices. That would mean the Dishwasher and its internal fuse remains safe.

Always use the correct Dishwasher fuse:

Every fuse has a current limit. That means it will only allow currents up to that value. If a current greater than the rated value flows, the fuse will blow, protecting the Dishwasher circuit.

That means your Dishwasher has a proprietary fuse, and only it should be used. Using any other will risk damaging the control boards and connected components.

FAQs

By now, you may already have replaced the fuse of your Dishwasher. But if any confusion remains, this section will aim to answer those.

Conclusion

Dishwashers are an important appliance for households. When it stops working, it can become an annoyance for you. But before you send it for repair, surely check its fuse and see if it’s working.

Thankfully, this article lets you know the GE dishwasher fuse location for swapping out easily and making it operational again. 

And that concludes this article for us today. I hope you had a good time reading it.