Why Your GE Washer Will Not Spin & How to Fix It

No wonder when the matter is about reliability and efficiency, the GE washer is a top-line laundry solution. But due to a couple of reasons, the GE washer will not spin and the frustration sets in.

For power issues to uneven load, faulty lid switch assembly, or motor coupling, you may experience the problem. Moreover, a broken suspension rod or malfunctioning control board can make the washer not spin at all.

However, when that happens you should first reset the washer by unplugging it for a few minutes and then plugging it back. If not fixed, you may need further detailed diagnosing and troubleshooting. No worry as we’ve brought a detailed guide for you. So, read on.

Troubleshooting For The GE Washer That Is Not Spinning

Here we’ve highlighted the easy and effective troubleshooting ways to fix the GE washer that is not spinning without any major diagnosis or replacement. So, check that.

GE Top Load Washer Is Not Spinning

When the GE top load washer is not spinning, there are multiple things that you can do to fix the issue by yourself. The things are listed below.

1. Pauses As Time Advances Forward

Pauses may occur in the top load washer between the cycles as the timer advances forward.

For example, there can be a three-minute delay at the end of agitation before the washer pumps and goes into spin. That’s why the washer may not spin.

Pauses for Full-Size top load GE washer

If the washer is not spinning, wait for a few minutes as the pauses may occur for 3 minutes.

Moreover, the pump-out process can also take an additional 3 minutes after the pause in the cycle. Hopefully, the washer will start spinning after the pump is out.

Pauses for Space Saving top load GE washer

If the washer is not spinning and the display shows the code dE or E2, it indicates the lid is open for which the pause has occurred.

To reset the code, close the lid, press the start/pause button, and restart the wash cycle. 

2. Unleveled Washer 

If you have filled your washer with laundry that is beyond the balance ring, the washer will start shaking up and will stop in the spin cycle.

So, if the washer stops spinning in the mid-cycle, ensure that the washer is properly filled and leveled. To level up the washer,

• Clockwise twist the leveling feet till they reach the ground. 
• Counterclockwise twist and turn the locking nuts to fix the leveling feet.

3. Power Issue And Lid Is Up

A power issue with the top-load GE washer will cause it to fail to spin. So, check whether your washer is getting enough power to work on.

Moreover, ensure that the lid of the washer is fully closed as no top load washer will not spin with the lid up.

Plus, make sure that the load is evenly distributed in the washer. You should evenly re-distribute the load manually.

GE Front Load Washer Is Not Spinning

When the GE front load washer is not spinning, follow the below steps to get the laundry back on track.

1. Pauses As Time Advances Forward

Same as the top load washer, pauses may occur as the timer advances forward.

So, here also, wait for a few minutes to see whether the washer starts spinning. The pump-out process can also take a few minutes after a pause in the cycle.

2. Power Issues And Small Load Size

Ensure adequate and proper power supply to the washer for it to spin properly. Check if there are any blown-out fuses or circuit breakers.

Moreover, you know the washer will not spin if the load size is too small. So, add a few more similar items to increase the load and balance it.

3. Opened Dispenser Drawer

Another cause for the front load washer not spinning is the opened dispenser drawer. So, check whether the dispenser drawer is fully closed to fix the problem.

Well, if you’re still struggling with the problem, then proceed to the next section for troubleshooting the problem.

Other Most Common Causes For The GE Washer Not To Spin

It’s essential to know the other reason for the GE washer spinning woes. For instance, faulty lid switch assembly, motor coupling, or drive belt. However, let’s delve into details to get a clear insight.

1. Faulty Lid Switch Assembly

The most common cause that can make the washer not spin is the faulty lid switch. When the lid of the GE washer is opened or the lid switch fails, the lid switch assembly prevents the washer from spinning.

So, to determine whether the lid switch assembly is defective,

Step 1: Check the continuity with the multimeter.

Step 2: If you see there is no continuity to the lid switch, then the lid switch needs to be replaced as it has failed to work.

To replace the lid switch, it will cost you $45.86 for the parts.

2. Faulty Suspension Rod

Generally, the top load GE washers have four suspension rods that support the washer.

If any of these four suspension rods break down or become dislodged, the main control board will stop the spin cycle in the washer several times.

The control board will do so in a try to balance the load of clothes.

• Look inside the cabinet of your washing machine. 
• Locate the suspension rod of the GE washer and look for damages. 
• If there is any visual sign of damage to the suspension rod, get it replaced to fix the issue. 

Replacement of the suspension rod of the GE washer can cost you about $30.79 for the parts themselves.

3. Faulty Motor Coupling

Motor coupling is the part of the GE washer that connects the motor to the washer transmission.

When the washer is overloaded, the motor coupling fails so as to protect the washer motor and the transmission. Not only the overload, but motor coupling also fails due to normal wear.

• Unplug the GE washer and locate the motor coupling by referring to the washer manual. 
• Inspect the motor coupling for any signs of wear and tear. If there is any, replace it with a new one. It can cost you about $100 – $250.

4. Drive Belt

Next, determine whether the drive belt of your GE washer is faulty. If the drive belt is loose or broken, then you have to replace it with a new one.

• Unplug the washer and remove the top and side panels to access the drive belt. 
• After locating, inspect for wear and tear. Also, ensure that the drive belt correctly goes through the pulleys. 
• If the drive belt is defective, replace it. For the parts, it will cost you about $14.78.

5. Control Board

The control board is the component of the washer that provides voltage to almost all the electrical components of the washer.

When the control board becomes faulty, it may not be able to send the power to the motor in the spin cycle.

As a result, the washer will not spin. Use a multimeter to check the control board and if it’s faulty, replace it.

Frequently Asked Question

Let’s go through some mostly asked queries of the GE washer owners about the spinning problem. Check that out for a comprehensive understanding. 

Final Words

Well, let’s hope you get that all about the GE washer will not spin matter. Indeed, it can be a frustrating issue but with the troubleshooting techniques, you can overcome the problem.

First, check for the causes mentioned above. If not solved yet, seek professional help as they can only address the exact issue for the GE washer spinning problem now.